Manhole Covers Ireland Ltd.
We cover everything.
Model Loading Base Clear Opening Overall Frame Height
CHDS40 D400 Square 300 x 300mm 430 x 430mm 100mm
CHDS50 D400 Square 450 x 450mm 570 x 570mm 100mm
CHDS70 D400 Square 600 x 600mm 720 x 720mm 100mm
CHDS80 D400 Square 700 x 700mm 820 x 820mm 100mm
CHDS Range Watertight Manhole Cover and Frame
Mod. CHDS Range EN124 D400 Sealed Cover & Frame
FRAME
It is obtained from a single cast, its stability is guaranteed through a double throat supporting area, creating a metal to metal coupling thanks to the interposition of an EPDM gasket, this is studied to obtain a watertight/waterproof sealing. Inside there is also a special provision to host, if necessary, the glass reinforced plate (GRP).
COVER
It is square in shape, it ensures a high stability due to a depth of insertion over 50 mm, the EPDM gasket inserted in the throat, which is located in the supporting area, and the locking system with stainless steel screws. The opening process is obtained through the insertion of specific handles in the blind holes of the surface. All the covers are interchangeable. The top surface is antiskid and it allows the complete flow of water.
CHDS90 D400 Square 790 x 790mm 890 x 890mm 100mm
Model Loading Base Clear Opening Overall Frame Height
CHFS70 F900 Square 600 x 600mm 720 x 720mm 100mm
CHFS Range F900 Watertight Cover and Frame
Mod. CHFS F900
EN-124
Frame
It is obtained from a single cast, its stability is guaranteed through a double throat supporting area, creating a metal to metal coupling thanks to the interposition of an EPDM gasket, this is studied to obtain a watertight/waterproof sealing. Inside there is also a special provision to host, if necessary, the glass reinforced plate (GRP).
It is square in shape, it ensures a high stability due to a depth of insertion over 50 mm, the EPDM gasket inserted in the throat, which is located in the supporting area, and the locking system with stainless steel screws. The opening process is obtained through the insertion of specific handles in the blind holes of the surface. All the covers are interchangeable. The top surface is antiskid and it allows the complete flow of water.
CHFS80 F900 Square 700 x 700mm 820 x 820mm 100mm
CHFS90 F900 Square 800 x 800mm 920 x 920mm 100mm
CHFS90_73 F900 Square 900 x 730mm 1110 x 1030mm 100mm
CHFS100 F900 Square 900 x 900mm 1020 x 1020mm 100mm
CHFS110 F900 Square 1000 x 1000mm 1120 x 1120mm 100mm
Model Loading Base Clear Opening Overall Frame Height
ECON800 D400 Round 800mm 1000mm 100mm
Maxum 800 D400 Watertight Cover and Frame
Mod. Maxum 800
D400
EN-124
Manhole Cover & Frame, watertight dia 800mm, DIN EN 124 - D400.
Locking
- fastened by 5 stainless steel bolts M16
Insert
- changeable dampening insert
- long life, high abrasion stability for
extreme loads
Design
- criss-cross design with optimal slide safety
Options
- Cover with ventilation hole
Model Loading Base Clear Opening Overall Frame Height
D91 D400 D400 Circular 600 diameter 850 x 850 Square 100mm
ESTANCA
Mod. D-90, D-91
D-400 EN-124
Breaking load 40 t
With 3 screws.
Lid and frame hold back water, supporting pressure of up to 1 bar.
The frame has a polythene inner border for its perfect isolation.
Hermetic lock with three stainless steel screws.
C250 & D400 Grating and Frame
E600 & F900 Cover and Frame
Access Chamber and Pole Boxes
Assist Lift Cover and Frame
Recessed Covers and Frame
Watertight Covers and Frame
Kio Composite Manhole Covers
Model Loading Base Clear Opening Overall Frame Height
MH-D-MAXUM D400 Round 600mm Round 850mm Round 100mm
Maxum 2 Bar D400 Watertight Manhole Cover and Frame
Two Bar D400 Cover and Frame
FRAME
It is obtained from a single cast, its stability is guaranteed through a Single throat supporting area, thanks to the interposition of an EPDM gasket, this is tested and guaranteed to be watertight and can take up to 2 Bar pressure from the under face of the cover whenBolts have absolutely to be tightened with a torque of 150 Nm.
COVER
It is Round in Shape, it ensures a high stability due to a depth of insertion over 50 mm, the EPDM gasket inserted in the throat, which is located in the supporting area, and the locking system with 3 stainless steel screws. The opening process is obtained through the insertion of specific handles in the blind holes of the surface. All the covers are interchangeable. The top surface is antiskid and it allows the complete flow of water.